|
Applications for the use of our backup sensor products are surprisingly
varied. You can find them on everything from sedans to pickup trucks to
buses to tractor-trailers and more. TailGauge offers several optional
accessories to improve the quality of the install and better protect those
wider and longer vehicles. You may order accessories by going
directly to our
shopping cart.
SensorGuard - Protective Brackets for Surface Mount Sensors
- $8.25 each
Part Number - SG101
(note: SensorGuards are NOT for use with Model A-F flush mount sensors.)
SensorGuards are triple nickel-plated steel brackets designed (and strongly
recommended) to protect the ultrasonic sensors when used in commercial
environments where they might be subject to damage by impact. SensorGuards
can be mounted with screws, nuts and bolts or rivets. The sensor cable feeds
easily through the larger hole. NOTE: You will need to purchase one
SensorGuard for each sensor that your kit contains.
To see photos of the brackets in use click here.
To order TailGauge accessories
please go directly to our shopping cart.
Replacement (Models V and V-SA) Sensor - $40.00 per sensor
Part Number - SV106
To order TailGauge accessories
please go directly to our shopping cart.
Replacement Model A Sensor - $40.00 per sensor
Part Number - SA106
Important Note: The Model A does not have the option of using a fourth sensor
To order TailGauge accessories
please go directly to our shopping cart.
35 foot Speaker Extension for Series A (Models A & A-F) Speakers- $17.00
Part Number SE135
The Model A system speaker has an 11 foot long cable and the Model A-F has a
two-part cable (a
4.5
feet cable that runs from the speaker to volume module, and a
14 feet cable that runs from the volume module to processor). This speaker extension is 35 feet long, thereby providing added length for longer vehicles.
To order TailGauge accessories
please go directly to our shopping cart.
Extension Cables for Series A Sensors
All the Model A sensors
included in the kits come with a 6 foot cable that connects to the
processor/power unit, while all of the Model A-F sensors come with a 8.5
foot cable that connects to the processor/power unit. If your vehicle requires longer extensions for either cable,
TailGauge now sells custom made
sensor and display extension cords. Each cord is pre-tested to assure that it works with TailGauge. All cords come with two modular plugs and a coupler for connecting the extension to the sensor or display lead.
To order TailGauge accessories
please go directly to our shopping cart.
Sensor Extensions
Part Number - SAX1xx |
 |
|
Sensor Extension
Cable | |
Length
in Feet |
Cost
(USD) |
|
1 |
7.85 |
|
2 |
8.45 |
|
3 |
9.05 |
|
4 |
9.65 |
|
5 |
10.25 |
|
6 |
10.85 |
|
7 |
11.45 |
|
8 |
12.05 |
|
9 |
12.60 |
|
10 |
13.25 |
|
Power Unit Cover - $2.00
Part Number - CO101
Many people have asked us if there is a way to give added protection to the power unit. Some users who have pick-up trucks, and some commercial vehicles, such as busses, want to mount the power unit in the bumper where it
might be exposed to the elements. We
have created a simple water resistant cover that is easy to wrap around the power unit after all the cables have been connected.
| 
